Get MTD for Income Tax ready
Get 90% off your plan for your first 6 months*

Get ahead of your quarterly update. Send it to HMRC through Xero by 7 November.

Quarterly update due in

Guide

Business energy costs: How to reduce your bills

UK business energy costs have no price cap. Here's what drives your bill and how to reduce it.

Business energy costs: how to reduce your bills

Written by Chelsea Heywood—Small business growth and marketing writer. Read Chelsea's full bio

Published Tuesday 20 October 2026

Table of contents

Key takeaways

  • Business energy has no price cap for most companies, so what you pay comes down to your contract and your supplier.
  • A typical bill is made up of a unit rate of pence per kilowatt hour (p/kWh), a daily standing charge, and VAT, usually charged at 20%.
  • Simple moves like timing your contract, sending accurate meter readings, and improving efficiency can bring your bills down.
  • Treating energy as a cost you can plan and forecast helps keep your cash flow steady.

What makes up your business energy costs

Your business energy costs come down to three main parts: a unit rate for the energy you use, a daily standing charge, and VAT. Once you can see each part clearly, it's easier to spot where your money goes and where you can save.

Unit rates

Your unit rate is the price you pay for each unit of energy, measured in pence per kilowatt hour (p/kWh). As of 2026, UK business electricity typically costs around 26p/kWh to 30p/kWh, while business gas sits closer to 6p/kWh to 7p/kWh, based on market comparison data, with longer-term trends published in the GOV.UK industrial energy price statistics. Smaller businesses usually pay a little more per unit than larger ones, because bigger users can negotiate keener rates.

Standing charges

A standing charge is a fixed daily fee you pay to stay connected to the grid, whatever your usage. It covers the cost of maintaining the network and reading your meter. Standing charges vary by supplier, business size, meter type and location, so it is worth understanding how standing charges work before you compare deals.

VAT and the Climate Change Levy

Most businesses pay 20% VAT on their gas and electricity, the standard rate. You may qualify for a reduced rate of 5% if your usage is very low (known as de minimis, in other words below a set daily threshold) or if your premises are used for charitable or residential purposes. You can check the details in the GOV.UK guidance on VAT for fuel and power.

Many businesses also pay the Climate Change Levy (CCL), an environmental tax added to gas and electricity bills. It shows up as a separate line on your bill, so it's worth a look to see how much you're paying.

Why UK business energy costs feel so high

UK business energy often feels expensive because prices follow a volatile wholesale market, and business tariffs come with fewer protections than household ones. A handful of factors combine to push bills up.

  • Wholesale price swings: Business rates rise and fall with global gas and electricity markets.
  • Daily standing charges: You pay these every day, even during quiet periods and holidays.
  • Out-of-contract and deemed rates: These apply when a contract lapses and are set by your supplier rather than agreed with you.
  • Fewer protections: Business tariffs sit outside the domestic price cap, so there's less to shield you from increases.

The UK also starts from a high base. Figures from the Office for National Statistics (ONS) show UK industrial electricity prices have run well above the international median over the past decade. Energy UK, the trade body, has said UK businesses face some of the highest electricity costs in the developed world. Because energy is a recurring outgoing, keeping a close eye on it is part of good cash flow management.

Is there a business energy price cap?

No, most UK businesses have no energy price cap. The price cap you may have heard about applies to domestic households, not commercial contracts.

Ofgem sets a price cap for domestic customers, which limits what suppliers can charge households per unit. Business contracts sit outside this cap, so your rate depends entirely on the deal you agree with your supplier.

There is some extra protection if you run a microbusiness. Ofgem defines a microbusiness by low energy use or a small headcount, and suppliers must meet clearer standards on contracts and complaints for these customers. You can read Ofgem's energy advice for businesses for the current rules.

How to reduce your business energy bills

You have more control over your energy bills than it might seem. These steps help you take charge of what you pay and steer clear of the traps that push costs up. For savings beyond energy, this guide to cutting business costs is a good place to start.

  1. Check your contract end date. Find out when your current deal expires, so you know when you can switch and avoid rolling onto expensive rates.
  2. Send accurate meter readings. Submit regular readings so you're billed for what you actually use, rather than estimates that can overcharge you.
  3. Improve your energy efficiency. Small changes like LED lighting, better insulation, timer switches, and turning off equipment overnight can cut usage across the year.
  4. Avoid out-of-contract and deemed rates. When a contract ends without a new deal agreed, you move onto a rate your supplier sets rather than one you agree, so it is worth arranging a new contract in good time.
  5. Compare deals and fix a contract. A fixed contract locks your unit rate for the term, which protects you from sudden price rises.
  6. Check your VAT rate. If your usage is low or your premises qualify, you may be eligible for the reduced 5% rate rather than 20%. Building these figures into your business budget makes them easier to manage.

How to compare business energy and switch supplier

Comparing business energy takes a little more effort than switching a home tariff, because every quote is tailored to your usage. Knowing what to look at makes it easier to compare deals fairly.

  • Unit rate: the price per kWh, which drives most of your bill
  • Standing charge: the daily fixed fee, charged even when you use nothing
  • Contract length: how long your rate is locked in, often between one and five years
  • Exit fees: any charges for leaving your contract early

Once you know what to compare, switching supplier follows a clear order. Timing matters, because most business contracts have a switching window before they end.

  1. Note your contract end date and switching window. Most suppliers let you agree to a new deal in the months before your contract ends, so check the dates early.
  2. Gather your recent bills. Have your usage, current rates, and meter details ready so quotes reflect your real consumption.
  3. Compare quotes from several suppliers. Weigh the unit rate, standing charge, and contract terms together, not just the headline price.
  4. Agree your new contract before the old one ends. This keeps you off deemed rates during any gap. Planning your usage ahead, using cash flow forecasting, makes it easier to pick the right contract length.

Keep your business costs under control with Xero

Energy is one of many running costs that are easier to handle when you can see them clearly. Xero brings your bills, spending, and income into one place, so you always know what your business is spending and where. With real-time reporting and cash flow forecasts, you can plan for costs like energy and decide with confidence when to switch or fix a contract. Get one month free and start keeping your running costs under control.

FAQs on business energy costs

Here are quick answers to questions business owners might ask about their energy costs.

Why is your business electricity so expensive?

Business electricity is costly mainly because commercial rates track a volatile wholesale market and carry no price cap. The biggest avoidable cost is letting a contract lapse without agreeing a new deal, so checking your contract status is usually the quickest win.

Do businesses pay 20% VAT on electricity?

Yes, most businesses pay the standard 20% VAT on electricity, though you may qualify for a reduced 5% rate if your usage is very low or your premises are used for charitable or residential purposes. To get the reduced rate, you may need to confirm your eligibility with your supplier.

Are business energy prices coming down?

Business energy prices rise and fall with the wholesale market, so they can move in either direction month to month. Fixing a contract when rates dip is the most reliable way to protect yourself from future increases.

Who’s the cheapest business energy supplier in the UK?

There's no single cheapest supplier, because business quotes depend on your usage, location, and contract length. The best rate for you comes from comparing tailored quotes rather than relying on advertised prices.

Get one month free

Purchase any Xero plan, and we will give you the first month free.